Friday, June 22, 2007

Handspun in Weaving


This is a first for me! I am using a handspun single for my warp and weft! I am impressed that the single is strong enough to work as a warp. I have had two threads pull apart, but it wasn't hard to repair them.

This yarn is from the first (and possibly only) raw fleece I purchased. It was a pain to remove the vegetable matter--yuck! But, it was a good test yarn. I have enough to do a good sized sample project (20"x60" on loom). The end goal is to explore the creation of woolen fabric to make my husband a vest to wear with his Lord of the Rings cloak. A secondary goal is to gain confidence with handspun so I can weave a scarf out of the fiber (now yarn) that my mom gave me when I first started to spin. It's been waiting patiently for a couple of years now! So far, I think there is hope!

Wednesday, June 20, 2007

A dyeing we will go...

It was another day for solar dyeing. Local temperatures were a little lower than the last day I did this, but I tried it anyway! Today I put a board covered with aluminum foil under my dye pots to increase solar reflection and put all my pots in big, clear plastic bags to help insulate them. Did I take any pictures? No! I was busy watching the kids play in the kiddie pool in the front yard! But the dyes just amaze me!


Green, purple and a touch of orange. This set was in my big roaster. I had to add some extra heat via the microwave at the end of the day because there was quite a bit of excess dye in the pot when I started rinsing.









Pink, purple, blue. This one was fun dye--I just poured the dye onto the fiber and let it soak in! The presoaked fiber was in a glass casserole (dyes only) dish with a lid.
















Check on the rainbow colors! Each of these were dyed in my old canning jars (now dye pots). Color is so amazing!









And with all this dyeing going on, guess what is waiting patiently for its turn to become curtains!

:)

Sunday, June 17, 2007

Finished fabric

This is the semi-artistic shot of my finished fabric for curtains. I wet finished it in my bathtub and then put it in the washer on a rinse/spin cycle (front loading washer) to get some of the water out. I used the dryer to get the fabric 3/4's dry, then put it outside on the line.



















With the fabric weaving finished, I spun some hand-dyed cotswold wool and cast on for a scarf. This is a simple lace pattern and I liked knitting it, but the resulting fabric didn't work. It had columns of 'slip one,knit two together, pass slipped stitch over' separating the yarn-over holes that were too stiff for me.

So, this scarf is now working on becoming my socks (at least I think they'll be mine!).

Sunday, June 10, 2007

Works in progress

My last dye-day produced some gorgeous rovings. Most of them were on a light grey wool and done in families of color. This purple one has some blue in it. I started spinning it last night... I like it!













Lest I forget...This is my new bobbin winder. One of my weaving guild members suggested this to me. It's a $7 hand mixer from WalMart. I used the tin snips and removed the cross bars from the beater, then wrapped tape around it so the bobbins would be snug on the post. It works pretty well--the speed control could be improved (it goes really fast on the slowest setting), but I'm not ready to take it apart to play with the gear ratios yet!




The weaving is progressing! That's almost an inch of yardage wrapped on that beam. I hate to tell you how hard it has been to work on this big project. I can only work on it a little each day. I have a paper where I'm keeping track of my progress. It's about half full of measurement numbers now. I think the end is in sight!

Tuesday, June 05, 2007

Spinning wheel!


My incredible husband helped me cut, create, and position the flyer assembly on the treddle base I refinished earlier this spring. Right now it has a cotton drive band and slips a little at high speeds, but it works! I was able to treddle and spin roving into yarn! Yee-haw!

There are a few things that are probably going to happen before we call this done, but it's amazing to see it actually work!

Thursday, May 31, 2007

Progress

My eleven yard warp took a while to wind onto the loom. My eleven yard warp (36" wide) is taking a while to weave into cloth...but I am making progress! One of my blue stripes is prettier than the other due to the way the variegated yarn was distributed across the stripe...but I may be the only one who ever notices the difference! I am almost to the halfway point. When I get a bit beyond halfway I'll take a break and get some sewing done (only so many "kids are sleeping" hours in a day).







It's nice to see progress!

Thursday, May 17, 2007

Pretties

Perhaps this post should be titled something about fiber overload...but there is so much to dye and so little opportunity to do it!




These rovings are a natural grey that I overdyed to see how they would turn out. They are pretty!






The multi-colored dye jobs were done by pre-soaking the rovings in warm water & vinegar, then drip drying the rovings and squirting them with acid dyes and baking them in the oven.






The solid pink was a stove-top vat dye job. I did a pound in my dye pot (my largest single dye job in that pot to date!).











Purples and blues are cool!















This last roving is white cotswold dyed with the soak and bake method described above. I think this will be socks for me!

Friday, May 04, 2007

Lessons in Warping

This is the longest warp I've ever put on my loom. It is also the widest. And I'm learning lots! The mess of warp chains hanging off the front of the loom has been cleaned up some since I took this picture. Part of the mess is that I started warping from the center of the piece and the number of threads needed did not match the number of threads in a single chain, so the threads from a single chain are split over different stripes. (That seems awkward to describe--one warp chain split into two different groups in the reed.)

Another learning point comes from the winding of the warp. I only recently learned to use more than one cone of yarn while winding the warp. It cuts down on the number of times around the warping board if you use more than one cone. However, there must be a trick to using more than TWO cones. My blue yarn was warped using two cones and has worked fine. My natural yarn was warped using three cones. Every now and then, while I was winding the warp, I would feel a twist or a snag as the three yarns twisted. As I'm winding the warp on the back beam these twists are causing problems.

See the twists in the yarn? When these get twisted tight they act as a knot and stop the beaming process.

So, I'm making progress--slowly! I can beam a foot or two before untangling the warp threads. I've broken one thread because I tried to force one of these knots through the heddles. Ick.

The next time I wind a warp like this (which should be soon. This is part one of two!) I will plan my warp chains to fit my warp stripes, and will use no more than two cones of yarn at a time while I warp!

Monday, April 30, 2007

Color my world...

Red, blue, purple, yellow, green...pick a color, any color! I had fun tonight mixing and preparing dyes! These are acid dyes that I purchased from The Woolery last year. My blue and yellow are close to the outermost ring of color on the colorwheel (from Deb Menz's "Color in Spinning"). My red is more of a magenta.

I started with three stock solutions--red, blue, & yellow. All the other colors are combinations of two stock solutions in 1:3, 1:1, or 3:1 ratios. I made a big table in my notebook to help keep things straight. This way I could make up each stock solution, pour it into the bottles, and rinse the container.

It's a bit scary to dye in my new kitchen. I don't want to make a mess! I kept a bucket of bleach water in the sink and worked hard to wipe up drips as they occured.
















Here are my dyes in their bottles posing for a colorwheel shot. I have yet to test the colors (I didn't remember to do it until mid-clean up!), but they look pretty in the bottles!

Sunday, April 29, 2007

K'nex wheel


One of the reasons why my loom is only partially warpped is this find at a garage sale. I got a tub of k'nex for a dollar. As soon as they had been washed my son and I started to play. He made spaceships and I made a spinning wheel.

Hmm. Let's rephrase that: He made spaceships and I attempted to make a spinning wheel. I was trying to do an accelerated quill wheel (ala walking wheel with miner's head). I was not successful.

This picture is attempt #2, made with help from my husband. It is also non-functional. I don't know why I'm set on making a functional spinning wheel, but I keep trying. I am learning lots and lots (much of the learning is discovering how much I don't know!). Maybe one of my next iterations will bring success!

Monday, April 23, 2007

Experiment with Natural Dyes

This experiment started early last week as my youngest walked around the front yard with a cute little bucket. She needed something to put in the bucket. Dandelions were plentiful, so we decided to pick dandilions. The older kids got into the fun too and we soon had a bucket of dandelion flowers.

I cooked them in a crock pot, poured the dye into a bucket to cool...and then left it for a few days. I wasn't sure of what to do next and after enough days I tossed the whole mess.

I then borrowed a natural dyeing book from my weaving guild's library (I LOVE libraries!) and when my neighbor showed up with a bag of dandelions that her kids had picked for me, I was ready to dye wool!

~5oz of dandelion flowers and stems cooked for 1/2 hour in ~1 gallon of water. I fished out all the plant matter, added more water and my presoaked wool (4 oz), and simmered the wool for 1 hour.

And this is what I got:












If you look really closely at that picture you will see that the wool at the bottom is browner that then wool at the top. However, if you don't have the undyed wool for reference it looks mostly like undyed wool. This is obviously not the right way to dye with dandelions! My guess is that this would work a lot better with a mordanted wool (I didn't do any sort of mordant!).

I took a ball of the dyed roving out for artsy photos this afternoon anyway!

Thursday, April 12, 2007

Fun Lessons on the Knitting Front

These are my baby's new mittens. Yep. I know. It's spring. Winter is months away.

However, I wanted to tackle some color work mittens. My mother-in-law is wonderful about handing me knitting books. Over Easter she gave me a sock book that had lots of patterns she liked, but would never knit. (It's "Socks, Socks, Socks" edited by Elaine Rowley.) A year ago she gave me a mitten pattern book with all sorts of wonderful color work patterns ("The Mitten Book" by Inger & Ingrid Gottfridsson).

When I first got "The Mitten Book" I was spinning a pale blue roving and paused long enough to knit a sample. I was amazed that I could do two color knitting. I'm much more comfortable with one color and cables. I was also impressed that my singles worked for this kind of knitting.

Time passed. Babies were born. Houses were bought and sold. More yarn was spun. I chose this triangle pattern (called "Night and Day") because it has a small repeat--only 6 stitches--and it has no long floats. And it worked! Look at me! I can do two color knitting!! I am excited!

And I now have an entire book of mitten patterns, and many, many sock patterns to use while I improve and perfect my colorwork techniques!

The best part about this knitting story is that a year or two ago I looked at the Socks book and thought, "I'll never be able to knit those. Look at all the different colors they use." Never say never.

Thursday, April 05, 2007

Off the Cuff

My great-aunt is here visiting. Last night we needed a project. I asked a few questions, we dug around in my stash of yarn, did a few calculations, and lo and behold: a scarf to take home with her!

The sett is 10 epi. The brown is a fine polyester single--somewhat prone to fraying! The gold is somewhat thicker with regular slubs in it.


I'm working on improving my photos with a "light box". The basic idea is that diffuse light makes for a better picture. This picture is nice (I took it at night with a flash). I did some color correction using Paint Shop Pro, and am pretty pleased with the outcome.

Just for fun, here are my calculations for the scarf. I have a white board in my workroom which gets used for all sorts of lists. It's a good place to write when I want to be able to see it while I weave.

Sunday, March 25, 2007

Overshot Exposure

The latest issue of Handwoven Magazine is dedicated to weaving with "overshot" structure. It is done using a fat weft for the pattern and another thinner weft for plain weaving to help hold the pattern in place.

This is my first attempt at overshot. Handling two shuttles and keeping track of non-pattern treddles was a challenge. I'm not in love with the technique, but at least I've tried it now (and won't be quite so frightened by it!).




Here is the same threading as the overshot woven as a straight twill. It looks a bit like an ekg trace! More importantly, this weft is something that has been in my stash for YEARS! And now it's gone! Hooray! It worked well here--it was a mercerized cotton (I assume--no ball band & I didn't do a burn test) slightly smaller in diameter than the 4/2 cotton warp. I liked the sheen of the mercerized cotton against the duller untreated cotton.




The threading for the overshot pattern was a 24 thread repeat. That's huge compared to my regular 4 or 5 thread repeats! This is the same threading tromped as a twill (1234321,4321234). I like how this came out. The warp is 4/2 cotton. The weft is "Aunt Lydia's Denim Cotton". The denim cotton is a 75/25 cotton/acrylic blend.

Sunday, March 18, 2007

Sampler Success!

Here are my two sample "towels" which were made to test the 5/2 cotton for my curtains. The one on the right is a plain weave that I did just for fun. The one on the left with the diamonds is the real test. The good news is that we like the way it looks, feels, drapes, etc. Now it's off to measure, remeasure and calculate to determine how many tons of fabric I need to make these curtains. Am I crazy? Oh, yea. Probably! :)

Thursday, March 15, 2007

Back to work

After what seems like a long break in posting, I'm back with more weaving. This piece is in 3/2 mercerized cotton. It's designed to be both a towel (two of them, actually) and a sample for the curtains I'd like to weave.

I like the way the big diamonds show up in the weave structure, but I'm not thrilled with the way the natural weft hides the blue in the weft. See the edge of plain weave on the edge of the front bar? I like that intensity of blue. ....

My husband just took a look at the project and commented that he likes...the reverse side! I had forgotten that this pattern reverses! The back side is the strong blue stripe with the natural weft making the diamond pattern. And that's exactly what I was hoping to see! Hooray! Hooray for extra eyes on my project as well!

Friday, March 02, 2007

Slow to Post





This is my latest project on the loom. It's a decorative scarf with warp threads at two setts. I have carefully placed the weft threads and am hoping that it will hold together!






On the finished object front, here is my first lace project! It's a ... opps! I forgot. It's getting put away to be given as a gift! It was a good first lace project.
























And this is for the "project yet to be". These two mini cones of 3/2 perle cotton are for a test piece before I order the gobs of yarn required to make curtains for my main room. If the test goes ok, I'll take a big breath and order the yarn!

Monday, February 19, 2007

Project Let Down


Have you ever finished a project only to be a little bit disappointed in the final product? This color gamp shawl did exactly what it was supposed to do--it gave me the opportunity to play with color in the warp and weft. And it looks....well....like a table runner, or a carpet. My warp stripes are completely overshadowed by my weft colors!

So, back to the drawing board. Things I learned in this project (in no particular order):
1) warp stripes are easily overshadowed by weft colors
2) 30" is an ok width to weave.
3) 60+ inches of length is ok, but I wound a lot of bobbins!
4) Braided fringe is nice for showing off color and keeping warp ends from getting tangled.
5) Twill patterns are cool! (They look so neat up close!)

Wednesday, February 14, 2007

Dust bunnies



As I was winding another bobbin for my color gamp, I found lots of dust on the loom. It turns out my make-shift bobbin winder is slowly being eaten away by the teeth on the conewinder! Go figure! I had no idea I would be spending so much time winding bobbins, but it sure beats having to wind all that yarn by hand onto a shuttle!

Sunday, February 11, 2007

Color!



The Wabash Weavers' Guild is discussing color in warps this month. I decided that it was time for me to do a color gamp. I chose colors from my stash--mostly aiming to use yarns of similar sizes--and trying to cover lots of colors. The warp is threaded in an alternating basket weave/twill variants structure from the book "Twill Thrills". I only have three colors of weft so far, but they are so amazing! The twill patterns show up differently with each color of weft!

My guess is that this shawl won't be done by Friday for our guild meeting. It's 30" wide on loom--the widest piece I've done so far--and will hopefully be 72" long.

Like all projects it has it's challenges. The first inch or so of weaving was plauged with a mysterious weft-removal issue. The basket weave sections at each end were somehow being 'un-woven'! It took a few moments thought before I remembered that basket weave required a double shot of weft, and that since I wasn't doing anything to secure the weft between shots I was unintentionally unweaving with the second shot.

There is also the challenge of trying to get even tension on the warp with a random collection of warp threads. I think my blue stripe is 100% cotton (the others are springy and I think they are likely to be rayon or polyester) and it just doesn't stretch like the others. It's been easy to overtighten this yarn, which looked terrible once I started weaving. I think I finally have the tension even--at least close enough that I've declared it's weaving time!

"Weave like the wind, Bullseye!"
(modification on a quote from "Toy Story 2")

Thursday, February 08, 2007

Finished Object (really!)


I know this looks like a ball of yarn, but it's really the sign of a finished object. The rest of the ball of yarn went to make a pair of socks for my preschooler who turns 4 this month. The socks are a toe-up pattern from Schurch's Sensational Socks book. Kids socks are a great way of trying new patterns because they are small!

Saturday, February 03, 2007

Art and Motion


Here's the latest off the wheel--green romney wool and yellow domestic top. These were part of a dye project a few months ago and I only have an ounce of each color. I am keeping these as singles for now, hoping that they will find a place in a weaving project!

Friday, January 26, 2007

Amid the Mess

While our kitchen has been under construction I've been working on smaller projects. This one is mostly a thought process. I am collecting yarn to see if I can weave a color gamp. Somehow or other I am frightened by color in the warp. It's scary. It's strange. It's new. Ahh. New things can be scary and strange. So, it's time to go with gusto and see if I can't make color less scary! I have two yarns I like...but the rest are blocked by my loom! Maybe in another week or two I'll have yarns not only picked out, but on the loom!

Another thought project in the brain is how to use pieces of rag as a warp. Any thoughts out there? I'm thinking of making curtains with a vertical stripe of blue jeans. The only way to get the curtain long enough (60+ inches) without piecing is to put the color in the warp. Can I put the rag in the warp--I'm thinking of laying it in as a second thread, much like gold or silver threads are used with another warp thread? Hmm. Food for thought.

Thursday, January 18, 2007

Bits and Pieces




These are my finished object for the week. They are my first pair of toe-up socks! I cast-on with the "easy toe" in Charlene Schurch's Sensational Knitted Socks, worked a 5-stitch pattern, did a short-row heel, and chose to make them anklets before I ran out of yarn! (That's what I get for using up leftovers!) I was pleased with the easy toe start--it was, well, easy. I'm not sure about the short-row heel...I may need to experiment with other types of heels.








This odd looking invention is my newest bobbin winder. I usually use my charka to wind my boat shuttle bobbins--a rubber band on the spindle holds the plastic 4" bobbin reasonably well. But this is better.

On the left is my Grandmother's cone winder. On the right is a cone (that fits the cone winder very well) with a screwdriver taped in it. The cone and screwdriver go on the cone winder. The bobbin goes on the screwdriver. One hand turns the cone winder crank, the other helps the yarn wind on smoothly.

Someday I will probably invest in a "real" bobbin winder. For now, this makes bobbing winding almost easy.

Saturday, January 13, 2007

Real Weaving (and more)

While my 4-shaft loom is residing among the boxes in my basement I got out my old "Weave-it" loom. I believe this one belonged to my Grandmother (although I could be wrong). I started using it a few years ago before I got my "big" loom, but haven't done much with it recently. The wool in these samples is all handspun and hand-dyed of varying weights. The poor scraggly thing in the upper right corner is a newly spun single that has not had the twist set. The pinks and yellows were all dyed with "Kool-aid" type drink mixes. The blue/yellow ones were dyed with food coloring.



The second picture is my "pretties"--these were all dyed with acid dyes. I did one batch in my new-to-me dyeing crockpot and one batch in my stainless steel dyepot. Of the four rovings only one came out as expected. The rest are miraculous mistakes! I layered the rovings in the dye pots and added concentrated dye solution to each layer. Once all the layers were in place, I added a vinegar/water solution and let the pot simmer for about an hour. I thought that the dyes would strike quickly and not turn the dye pot into an immersion dyeing session.

I was wrong! However, the dark rovings (both the purple on the right and the green in the back/left) have amazing variations in color! They are not a single solid color, like from a regular immersion dye pot, but blue/black/purple (or green). They looked so beautiful drying in the sunshine! The big question is now can I give these up for sale on my etsy shop? Hmm. I'm not sure. The purple is gorgeous. It might not leave the house. But the green is the color of my old and well loved crewneck sweater. Dooh! Dyer's Dilemma!


Sunday, January 07, 2007

Our New Mantra...

Once upon a time, our family moto was "I am not a professional". We would tackle all sorts of projects knowing that we were not professionals and that there would be errors in our work. We did the best we could on those projects (and hired real professionals for some things!).

Now we have a new saying: "Anyone could just spend money." I'm not sure it's a good saying, but it encourages us to make do with what we have and to be creative with what we want.

It is construction season in our home. Contrary to our new saying, we have hired a contractor to come and remove all of the interior walls of the main level of our home and shift the location of the kitchen. It is dusty around here. Most of my fiber is packed away. But I *need* to play with fiber. So, when I tripped over an old wooden clothes-pin I tried using it as a 'not-quite-drop' spindle. And it worked. Slowly.

Then I came across the "Rakestraw spinner" at fibers.downinthecontry.com. It's an interesting twist (no pun intended!) on a drop spindle. And so I made one out of cardboard, a nickel, and my daughter's pencil topper! Believe it or not, the thing works! And it's a lot faster than the clothespin!

My other 'don't spend money' project is a spinning wheel. I got a small bike rim from our local bike shop--I highly recommend "Rotten Robbies" in Crawfordsville for biking needs. My husband got his bike there, and I got my spinning wheel rim from them. And when I explained what I was doing and why the guys didn't look at me as if I were crazy! This is the same frame that once had the wooden X, but I've stuck the bike wheel on it. Finding a good way to attach the footman and drive the wheel has me baffled. But I'm still working on it! If nothing else, this project is teaching me the value of a few hundred dollars when they are spent on good equipment! Hooray for all the spinning wheel engineers out there! I like my Louet!

And, lastly, this is a collage of bits and pieces of an almost finished object. As soon as I add a closure it will be my baby's "Quiet Book" full of little quiet things for her to play with. It's cute and I like it. I've sewn most of it by hand--mostly because that way I could work on it and be social. If I knew what I was getting into when I started this project, I probably would have run away! But it's done (or almost done!) and I am glad to see it's nice!