Sunday, July 06, 2014

Felted Drier Balls


 I have a group of drier balls ready for the upcoming Farmers' Market.  I thought you'd like to see them before and after final felting.

Here they are ready (or almost ready...note the color of the bird's beak) for final felting:


Then they get stuffed into an old stocking or two.  I use twisty ties between drier balls to keep them separate.

The balls get soaked in a bucket of water, squeezed to get some water out, and then they go through a cycle in the clothes washer and the drier.  After that, I do a little bit of touch-up needle felting and they are ready to pair together and use.

Sunday, June 15, 2014

Farmers' Market...The Experiment Continues

I was at the Farmers' Market again this week and a friend sent me this photo that she took.  This was my third time at the Saturday market.  I had some plans change at the last minute last week and my husband invited me to spend the day at the market, so I did!  Both weeks the weather was beautiful and the crowds friendly and full of familiar faces.  One of my favorite aspects of the market so far is the number of old friends and acquaintances that I see!

On the experimental side...the addition of my new sun umbrella is a big bonus.  It is a "joeshade" umbrella, designed for parents attending unshaded sports events.  It's just the right size for my little set-up.  I'm using about 50 lbs of sand divided into three bags to keep the base stable.  Dryer balls have been a big hit.  Some people are buying them to test the concept.  Others buy them because they are pretty and will make good gifts.  Towels are also selling.  None of the towels sold the first time I was at the market.  People weren't prepared to spend that much money that day.  But the last two weeks I have sold towels as well as the dryer balls, and most of the sales have been to people who saw my things previously and came prepared to buy this time.

I'm not expecting to get to the market again until the second Saturday in July.  I have a new set of towels to weave and more dryer balls to felt, but I'm enjoying the experiment so far!

Sunday, June 01, 2014

Pixie Claws/Wool Combs

I have a new set of wool combs!  These are "Pixie Claws" made by Beth Duncan.  I picked them up on Wednesday, and immediately got to work with some Border Leicester fiber I had washed.  The combs do a great job of opening the fiber, removing vegetable matter, and making ready-to-spin top.  I was  thrilled!  I ordered my set of combs with two rows of tines on one comb and three rows on the other.  My hope is that this will give me the extra combing power of multiple rows of tines, but the lighter weight of a comb that only has two rows of tines.  So far, I have kept the three row comb stationary and have used the two row comb in my hands.

 Here is the Border Leicester after a few passes (I think I was doing a total of four passes, then dizing the fibers off).  You can see the "D" shaped handle on the comb in the back.

 The combs have a holding block that allows them to be used as a hackle.

  Turning one comb upside-down on the other  gives a safe way to store the tines.(which, incidentally are not sharp, just pointed.)

 One comb has two rows, the other three (my preference).  These are the medium tines.

Thursday, May 15, 2014

Ouch!

Check out what I'm wearing these days.  :(  It's a wrist brace to help keep my hand in a neutral position to help my poor overworked wrist to heal.  Last week while getting things ready for the Farmers' Market, I hurt my wrist--just doing regular stuff, I had just done too much.  It hurt so much I immediately stopped working and put ice on it.  Ouch.

Now it is doing better.  It's better enough that it is often easier to use my braced hand than it is to slow down enough and use my left hand.  That means I am using it again.  I have to keep reminding myself that the body needs time to heal.

Saturday, May 10, 2014

Research and Experimentation




Today was the first phase of my latest research/experimentation.  I had a booth at the local Farmers' Market! The weather was beautiful-sunny, warm, and dry--perfect for being outside!
My "booth" is a 2'x4' folding table.  I was selling my handwoven towels in two sizes (19"x29" and 10"x15") and felted drier balls.  The drier balls were a hit and sold.  The towels were considered "beautiful" and "lovely", but none sold this week.  I'll be back at the market the second Saturday of June and will run the experiment a second time.



Wednesday, April 30, 2014

Bicycle Spinning Wheel

Someday, I would like to have a great or walking wheel.  In the mean time, my husband and I put together this bicycle wheel.  I hope to use it for the 4th Grade Pioneer Day demonstration in May.  


The wheel has a frame built from 2x4 lumber.  All pieces were screwed together using long (~3") deck screws.


The bicycle tire rim is attached to a short section of angle iron which had pre-drilled holes.  Our first version had short (1") screws holding the angle iron to the upright, but it was not stable.  The longer deck screws do a much better job of holding it securely. The axle from the bicycle tire rim is bolted through one of the holes on the vertical side of the angle iron.


The upright is an "L" shaped piece with a slot in it.  It is able to move back and forth and twist a little to tension the drive band.  It is held in place by the wing nut and washers on a bolt that comes up through the 2x4 of the frame.


The spindle is a knitting needle.  I originally used a us#10.5 needle, but recently swapped it for a us#9, because the 9 fit into a straw, which I am using as a bushing to make it easier for it to spin.  The drive band is waxed linen from my leather toolkit.  It does a good job of grabbing onto the slick needle and making it turn.

Many thanks to the following blog posters for their contributions:

 Rosemary Knits --proof of concept that this type of wheel could work!
 Ed Jenkins --beautiful walking wheels, and the idea for the L-shaped upright.
Alden Amos --I discovered Alden's t-frames after constructing the first version of this wheel.  This is cheaper, but I imagine that his require less fiddling! (And they look so pretty!)

Sunday, April 20, 2014

Color Blending for Fiber Artists

I was thrilled to have students sign up to take my color blending class at the Fiber Event this year.  My four students blended their own 12-hue color wheel, each color blended from combinations of red, blue, and yellow.  We spent some time identifying colors in photographs and discussing different ways to use those colors in a fiber project.  It was a fun class!  A big "thank you" to all my students!

Supplies ready to go for the Color Blending class at The Fiber Event.




Here are some photos from a color blending project I finished this week and took to show my class.  The little baggies in the center contain fibers.  The bag on top were the original colors.  The lower bag are the colors after I blended them.  I ordered the original colors into an approximate color wheel and then blended each color with some of the colors to each side of it.  50% of the blend is the "main color"; 25% of the blend is from the adjacent colors.  I love how blending the colors ties them together!

The scarf is a modification of the pattern "Wingspan" from Ravlery.  It was once a free pattern, but has been expanded and is no longer free.  I liked having the information on how to tweak the pattern that is included in the paid version.  The scarf is a series of shifted triangles which gives it a tendency to curve.  It didn't take much to make the scarf into a circle for this photo! -- The cast on color is the red; the cast off color is the red-purple.


Here's a closeup of the colors of the Merino fibers.  As dyed on top; as blended on the bottom.

Monday, March 03, 2014

My turn! Fixing Errors with a Warp on the Loom

See my lovely pile of extra heddles?  I took them off my Mighty Wolf recently.  I've read about how challenging it is to have to remove heddles with a warp on the loom and tried really hard to avoid this!  Unfortunately, the way I eye-balled the warp didn't work.

This warp is 32" wide on a loom with a 36" wide weaving width.  As I threaded, I tucked extra heddles throughout the warp, hoping to avoid having to remove heddles. By the time I was tying on to the breast beam, it was obvious that I'd need to do something more.  The warp threads at the left edge of the loom were being pushed in by the extra heddles at the side of the shafts.  Time to remove heddles!

Before removing the heddles I threaded the top, the eye, and the bottom  of each group with a piece of cotton thread and tied them securely.  This should make it easy to put the heddles back on the loom later.  Keep your fingers crossed!

Now to go put the heddles away in my collection of weaving tools so I can find them when I want them back on the loom!

Saturday, February 01, 2014

A Little Bit of Lots of Stuff

The above photo is of a baby blanket woven for some friends.  The warp is a burgundy color, the pattern weft is a light pink (both in 10/2 cotton) and the tabby weft is a wool/angora/nylon yarn that I recycled from a sweater dress and is dark purple.  I love the hand of the blanket!  The recycled yarn softens the hand of the crackle weave significantly!

Check out these little samples:

 They are about an inch and a half tall by one inch wide.  I'm doing a custom piece for an individual and we needed to determine color order for the stripes.  I had wound a larger piece before I realized that maybe the colors should be in a different order and started winding the tiny tests.  Well, after the fifth tiny test I had found a combo that I liked and paused for a moment to run some calculations.  With five colors the number of color combinations are 5! (five-factorial), which equals 120 possibilities!  Half of them are reflections of each other--ABCDE is the same as EDCBA, which brings the number down to 60 possibilities.  Gasp!  Still to many to manage!  My fiber enabler came to the rescue and did some programing so that I could see all sixty color combinations.  Whew!  What a challenge!

Here's another little project on my first structo loom:
 It's a plaid fabric for Conner Prairie.  They are working on recreating a piece and this is one of many plaids that will become a part of the finished project.
This is how it looked going on the loom:



And, just because I'm excited about it, check out the new little structo that has come to stay at my house!  This is not the one being used to weave the plaid, it's another one.  :)  I keep hoping that one day I will find a way to teach weaving, so I am starting a collection of these little looms. 

Thursday, December 26, 2013

Short Term Visitor


We had a short visit from a weeble-wobble type friend before school let out.  My 5th grader said to me at four in the afternoon, "And, Mom, my last bit of homework is a gift for the exchange at school tomorrow."

Argh!

I did a few quick calculations and decided that if I worked quickly and figured driving time as "free time", then I could probably needle felt a gift within the price range of the class gift exchange.

So I got to work.  First I consulted with the 5th grader.  We talked ideas.  We made plans.  Then I set to work.  There are details--like the blue eyes and very red (cherry red, mom!) nose that were definitely beyond my liberty to change--but overall I thought he was cute.  And the felted friends in the cupboard enjoyed their visit from Santa very much!

Sunday, December 15, 2013

Art in Icing

These are a couple of scoops of buttercream frosting with gel dyes in them (we were getting ready for decorating Christmas cookies! :)
Blue and red for purple:

Blue and yellow for green:

Yellow and red for orange:
I used a lot of dye this year and the colors blended beautifully!  They look streaky here, which I love, but they did mix well and made great cookie icing!  Hooray for beautiful colors in life!

Friday, December 13, 2013

Finished Christmas Quilt #1


The quilt is done!  Those are the new owner's toes at the top of the quilt.  She has used it two mornings now as we have read from our Christmas story book.  Each morning she has carefully folded it so a different block was visible.  

I love it when a gift is loved!

Here is a photo of the back.  I ended up purchasing wide flannel from Fabric.com.  I tried to find flannel that worked at some more local places, but those that had flannel didn't have the right color or prints.  This cream flannel is nice and shows enough of the quilting to be pretty!

Tuesday, December 03, 2013

Christmas Quilt

Remember how I made all those quilt blocks in 2012?  The first group has been made into a quilt top and is now on the quilting frame!  Whee!  Mom came over to help with the quilting.  The quilting frame we are using is one that Mom picked up at auction years ago.  It's old, but it works great for this job!

Sunday, November 24, 2013

Projects--a collection

Blocking lace.  I love the effect of blocking pieces of knit lace.  The yarn over holes open up and the stockingette stitch areas become smooth...  I love it!
 Fixing mistakes.  Sooner or later I usually fix my mistakes.  It wasn't until I began to weave that I finally understood that if I could see a mistake then I would always be able to see the mistake.  More often then not, there is no effective cover-up for a mistake.  This one was a denting error, ten threads in from the edge on a warp that had already given me fits.  I tried to brush it off..."It will never show with the thick weft..."  It showed.  So, I stopped weaving, pulled out the weft, fixed the denting error and began to weave again.  It looks much better without the error!

Sewing.  My daughter decided that she needed a new dress.  She did some shopping and came home empty handed.  She went through my pattern books and found a dress design she liked.  I slowly began to work on it.  This pattern is from a collection by "The Golden Rule".  Each pattern is printed in miniature and the seamstress enlarges it based on the measurements of the wearer.  So I measured.  I drafted.  I made a muslin (I knew I would need it!  The pattern was older and I was sure the fit would be different from my daughter's preferred style....) I modified the pattern and finally made the dress.  I had to promise to not put her head in the final picture, but here it is.  The collar is gathered at the neck and comes down to a point at the center front and back.  The purple is amazing with her reddish-blond hair!

Knitting, frogging, and knitting again.  I would like to knit shawls.  I have a little "shawlette" that is wonderful to wear around the house.  It's just enough to warm my back and shoulders, but not enough to get in the way of doing things.  I have a new shawl book, so I found a pattern I liked and cast on.  Of course I modified it...and in the end, I didn't like it.  This is a traditional triangle shawl with a point at the center back.  I'm not fond of the style (why did I cast on?) and I didn't like how stiff the finished fabric felt.  I kept going, hoping that things would get better, but they didn't.  In this photo, the shawl is off the needles and on a string so I could wrap it around me and see how it worked.  It didn't.  It got to sit on the table for a few hours while I did some research and chose a new shawl design.  Then it got frogged.

This was one of the reasons I frogged the shawl.  I knit a sample with an extra ball of the same batch of yarn on bigger needles.  It was so much softer and had much better drape.  I tried one more needle size after this picture.  Swatching is really helpful!
In my research to save my shawl, I discovered a new webpage:  Laylock Knitwear Design.  The shawls are fun, but scroll down and look on the right hand side for the "Shawl Knitting Cheat Sheet".  Wow!  It's a single page pdf with instructions for make five different shapes of shawls all from the same three stitch cast-on!  I've decided to make a "heart-shaped" or crescent shawl because it will have longer ends for tying.  And, I made some swatches:
Neither of these have been blocked, but they are here anyway!  On the right is the pattern as written by Laylock Knitwear.  On the left is my modified version--no yarn-over holes and a three stitch garter edge.  The knitting is progressing.  I hope there will be another shawlette in my drawer soon!

Saturday, November 23, 2013

Fabric Crayon Tests

 One of the things I inherited from my grandmother was this package of fabric crayons.  They mostly hang out in one of the drawers in my craft room.  Every now and then, they come out to play!    (The first time I ever used them was to color on a white t-shirt that we picked up at a garage sale.  The colors washed right out!  It was terrible, especially with a young child looking over my shoulder!  Then I re-read the instructions, re-colored the shirt, and set the color with an iron.  The shirt is still colorful today!)
  
Recently, the crayons got to come out and play with some dark fabric.  First I had to do  burn test to identify the fiber content.  Interpreting burn tests (hold small bit of fabric in tweezers or tongs over the flame of a candle.  How does it burn?  What does it smell like?  How does the ash behave?--Do a google search if you need more details.) is not my strong suit, but I learned enough to trust that there is some synthetic component to this dark fabric.  Whew!  The crayons need 50% or more polyester in the fabric to adhere well.    Time for a coloring test.  

I had two tests to run.  Test #1 was determining what color the crayons would be on the dark fabric.  Orange on white is definitely orange, but on a dark color it's harder to know how it will look.  So I drew letters with each crayon and colored them in.  Orange was "o", yellow was "y", etc.  "bs" is burnt sienna and "?" is a color that had no wrapper/label.  Test #2 was a color transfer test.  The instructions for the crayons indicate that you can color on paper, turn the paper colored side to the fabric, and iron it onto the fabric.  So I tried it--and it worked!  Go figure!  The transferred images are not as dark as the ones where I colored directly on the fabric, but they weren't bad at all!

Sunday, November 17, 2013

Feedback on my Handspinning Skills

Some time ago I purchased the handbook for the "Certificate of Excellence in Handspinning" from the Handweavers' Guild of America.  The first time I read through it, I set it aside on a shelf.  It was way too much work for me at the time.  A few years later, my youngest child went to school, and I pulled the handbook off the shelf again.  This time, I was familiar with spinning almost all of the fiber types required, and was much more comfortable with my spinning abilities.  So, I decided to go through the work.

The work consists of 40  one ounce skeins of yarn, spun from specified fiber types and spun to specified parameters, as well as written work.  There was a group of wool fibers--starting from the dirty fleece, doing the prep work, and then spinning the yarn; a group of cotton, silk, flax...Forty skeins!  I was amazed at how quickly the thick skeins spun and how long (forever for some!) it took to spin some of the extra fine fibers.

Eventually, I got to the point where I had to decide once and for all if I was going to submit my work for evaluation.  I did a lot of hemming and hawing.  Some of the arguments included "but it's expensive!" and "what if they tell me I'm terrible!", but finally it came down to the value of having someone else critique my work so that I would know how to improve.  And so, I finished the written work and sent off my skeins.

And I thought that I didn't care whether or not I passed the evaluation and received the certificate.  But I was wrong.  I didn't pass--I was in the 82nd percentile and needed to be in the 85th to pass--and I was depressed about that.  I think the hardest aspect was that three of my skeins failed to meet criteria and received zero points.  Those failures are still very frustrating!  My hope had been to have no zeroes, but to earn at least some points in every category and that didn't happen.

The positive side of those failed skeins is that dealing with failure, pushed me to read the comments of the reviewers over and over again.  I don't think I would have looked so closely at the comments if I had succeeded in earning the certificate.  I was very pleased with the feedback and evaluations I received on my spinning.  Most of the skeins were scored out of 54 points.  If I earned anything less that 52 points the examiners made sure to provide comments so that I could know where the problems were and what could make the yarn better.  That was worth every penny of the cost of the evaluation.

Would I do this again?  Maybe.  Maybe in a few years I'll decide to see if my skills have improved and repeat the process.  I think I would start fresh, rather than resubmit these skeins. I think it would be nice if I could do well enough to earn the certificate at that time.  Until then, I'll keep spinning.  There's merino wool on one wheel; a bit of a horned dorset fleece to wash up and spin; some Cormo for the Russian spindles...I may be busy for a while just spinning the things I want to spin!


Tuesday, November 05, 2013

Coptic Bound Book


Check it out!  I bound a book!  It's not the first one I've ever done, but it is definitely the best!  I followed an on-line tutorial for a double needle coptic binding, used signatures that I folded at the Athens Art brown bag lunch lecture on book binding, and felted my own cover decoration (the cardboard covers were first covered with a cream, linen-like fabric, then the felted decoration was sewn to the cream cover).  After all was said and done, I discovered that the book was so nice, I was hesitant to write in it!  So I gave it to a friend.  She was thrilled to get a new journal book!

Just so I remember, the decorations on the felt are all crocheted.  Anita Mayer in her DVD "Creative Cloth" describes using crochet chains as embroidered embellishments as well as yarn wound rings.  My rings are 100% yarn--no plastic inside.  I started with a sliding loop and crocheted over that.

Sunday, September 29, 2013

Prizes, Yarn Uses, Finished Scarf


Robin's multi-colored cotton boucle on the loom


I follow Robin Edmunson's blog "Rurification".  She lives within a couple hours of my home and posts wonderful suggestions of ways to use the local harvest.  My favorite food thing she suggested was making chive flower vinegar.  My youngest loved our chives and was thrilled when we put the chive flowers into the vinegar and it turned the vinegar pink, her favorite color!

This summer Robin had several give-aways on her blog.  One of them was some hand-dyed cotton boucle yarn and the pattern to crochet it into a shawl.  I entered....and won the yarn!  I was excited!  I tried crocheting the shawl pattern.  It didn't make my socks go up and down.  So, I found an alternate use for the yarn.  I wove it in a deflected doubleweave piece and turned it into a scarf.  Tee-hee!  Deflected double weave gives great dimensionality to a woven piece!

This weave structure is referred to as "Marshmallows" Madeline van der Hoogt and "Cloudy Day" by the designer, Lynn Tedder.  The draft is available in Handwoven magazine, Jan/Feb 2001,p.62-67.  The squares of cotton on the scarf puff out and push in....I love it!

The concept of deflected double weave is still a bit mind boggling.  Essentially two layers of cloth are woven at the same time on the loom (that's the double weave part) and the two layers are next to each other.  Upon removal from the loom, the threads shift or deflect so they are on top of each other which creates the multi-dimensionality of the piece.   Additional interest can be created if the two layers are woven with felting vs. non-felting fibers.  A felting wool will not only deflect, but also shrink and can create amazing textures in the final pieces.

So far I've only woven two deflected doubleweave pieces, but I'm hoping to do more soon!


Just so I remember--I wound the dark purple warp threads on a fake second back beam.  I used the raddle for my Mighty Wolf to keep the purple threads separate from the variegated cotton ones.  The purple threads had a rod placed in the end loop of the warp, the rod was held next to a larger wooden stick, the the warp was rolled with paper as a separator.  I hung the sticks with the purple warp off the back beam and then added two cords with live weights (two 15oz cans of veggies vs. one smaller, perhaps 8oz, can of tomato paste for each cord).  It worked well!  Also, the dark purple threads are a recycled wool blend yarn.  It originally came to my house as a sweater dress.  I like it much better as a weaving yarn (even if I do have to ply it to give it enough strength for a warp!).

Tuesday, September 24, 2013

Dog Sweaters

 A fellow I know from church needed a new sweater for his little dog.  He knows I am a fiber artist and spoke to me at one point last year, but nothing came of the idea of making a dog sweater.  This year, however, we connected and I have made two sweaters.
The green sweater is an old one that the dog has worn for years.  The special part is the sleeves for both the front and back legs.  The replacement is the blue one.  The yarns are 100% acrylic (blue) and an acrylic/wool blend (grey). The sweater was knit in 6 parts--4 legs, the back, and the chest--sewn together and stitches picked up to knit the ribbing for the neck.

If I were to redo the sweater, I would change the sleeves.  I used stockinette stitch for them and they have a tendency to curl.  I used a broken rib stitch for the body and it doesn't curl.  The broken rib stitch would have been better for the sleeves.




I made a second sweater for the dog.  This one is the one I really wanted to do!  It has a woven back piece with knit sleeves, neck and chest.  I was surprised that it took just as long to make this one as it did to make the knitted one.  
I crocheted around the top edge of the woven piece.  The piece has been felted so I don't think it would have frayed, but the crochet gave it a much more finished edge.  I sewed the underside of the piece rather than crochet on both sides of the edge.



I am hoping to get photos of the sweaters on the dog when the weather is cooler.  I'll post them here if I get them!